Proxima PL-300E User's Guide download pdf (Page 11)

ON indicator

LAMP indicator

TEMP indicator

Indicator status

Lights orange

Blinks green

Lights green

Blinks orange

Lights red

Blinks red

Lights red

Blinks red

Meaning

Standby mode

Warming up

Normal operation

Cooling down

Lamp cannot light

Air filter detached

Temperature inside too high

Cooling fan failure

Action

—————————————

Cool projector by power off for 20 minutes.

Check the air filter.

Check that ventilation holes are clear.

Service the projector.

Indicator display

The ON indicator, LAMP indicator and TEMP indicator will light or blink in the following cases.

The LAMP indicator will light when the lamp becomes too hot.

1. Turn off the power and let the projector cool for 20 minutes.

2. Turn the projector back on. If the LAMP indicator still glows red, contact your dealer.

Message

NO SIGNAL IS DETECTED

SYNC IS OUT OF RANGE

CHANGE THE LAMP

Action

Check the input signal connection.

The horizontal frequency of the input signal exceeds the range of the

projector,and it cannot be displayed. Change the resolution of the input signal.

The lamp should be replaced.

Projector Messages and Indicators

On screen display

The following messages may be displayed on the screen.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 28 29

Comments to this Manuals

No comments

Proxima PL-300E User's Guide Page 11

Comments to this Manuals

Related products and manuals for Data projectors Proxima PL-300E